Lighting Systems
STRATOS N
The Stratos N is a LED streetlight designed to replace old L-HPS, MH and MV cobraheads in many downtown and suburban areas.
It is our most cost-effective solution, designed to match or beat the prices of traditional discharge lighting.
It is solidly built with a clean design, casted using a patented corrosion free aluminum alloy, completely weatherproof.
Our proprietary optics enable the Stratos N to maximize the energy saving, tailoring the light pattern to reduce the light pollution into adjacent properties and the night sky.
The optics allow the fixture to light everything from parking lots and crosswalks to roads, pedestrian and cycle lanes.
Uniformity of the light and the glare control improve road safety at all levels.
NEMA 4 Twist Lock photocell, 1-10V, DALI and wireless control are available.
TECHNICAL DATA
120-277 VAC / 347-480 VAC available
SUPERCAST® aluminum die cast body
5 mm protective tempered glass
IP66 / NEMA 4X
L70 >100,000 hrs
4100 K – 5500 K / CRI >70
Insulation Class I
EPA 0.32 ft2
Operating temperature -13°F to +113°F
Weight 12.1 lbs
- Replaces up to 250W L-HPS/MH
- Unbeatable price/performance ratio
- Improved cooling capabilities for a stable luminous output and wide range of application fields
- Photovoltaic version available
STRATOS P / G
The Stratos P and G lights set new standards for street lighting, designed to replace old L-HPS, MH and MV cobrahead.
It is solidly built with a clean design, casted using a patented corrosion free aluminum alloy, completely weatherproof.
Our proprietary optics enable the Stratos family to maximize the energy saving, tailoring the light pattern to reduce the light pollution into adjacent properties and the night sky.
The optics allow the fixture to light everything from parking lots and crosswalks to major highways and highway junctions.
Uniformity of the light and the glare control improve road safety at all levels.
NEMA 4 Twist Lock photocell, 1-10V, DALI and wireless control are available.
- Replaces up to 1000W L-HPS/MH
- Improved cooling capabilities for a stable luminous output and wide range of application fields
TECHNICAL DATA
120-277 VAC / 347-480 VAC available
SUPERCAST® aluminum die cast body
5 mm protective tempered glass
IP66 / NEMA 4X
L70 >100,000 hrs
4100 K – 5500 K / CRI >70
Insulation Class I
EPA: 0.54 ft2 (Stratos P) – 0.65 ft2 (Stratos G)
Operating temperature -13°F to +113°F
Weight: 22 lbs (Stratos P) – 36.6 lbs (Stratos G)
30R550 53
30R700 65
40R550 68
40R700 85
50R550 84
50R700 105
AKRON
The Akron is a LED parking lot light designed to replace old shoeboxes as well as area and flood lights.
The Akron’s uniquely thin profile makes it more aesthetically pleasing than nearly every other fixture on the market.
The CRI and optics available with the Akron make it a perfect match for car dealerships.
Using the optics to control the light output creates a strong contrast between the lot and the surrounding areas.
The bright vivid colors of front row cars are eye-catching and the lot is evenly lit giving it a professional and groomed look.
1-10V, DALI and wireless control available.
- Replaces up to 400W MH/L-HPS
- Positive impact on your business
- Even lighting through all the lot
TECHNICAL DATA
120-277 VAC / 347-480 VAC available
Dark gray die cast aluminum body
5 mm protective tempered glass
IP65 / NEMA 4
L70 >100,000 hrs
4100 K – 5500 K / CRI >70, available >75
Insulation Class I
EPA 0.54 ft2
Operating temperature -13°F to +113°F
Weight 21.6 lbs
MODELS POWER [W]
25R550 44
25R700 55
30R550 53
30R700 65
40R550 68
40R700 85
50R550 84
50R700 105
TRILOGY N
The Trilogy N is a LED light bar designed for general flood lighting and sign/advertisement illumination.
The Trilogy is also perfectly suited for warehouse shelving, lighting shelves top to bottom while providing an adequate level of light on the floor.
Suited for all weather applications.
1-10V and DALI dimming available.
- Replaces up to 400W MH for signs and 250W MH for flood/warehouse lighting
- Increases the visibility of your business
TECHNICAL DATA
120-277 VAC
Aluminum body
4 mm protective tempered glass
IP66 / NEMA 4X
L70 >70,000 hrs
4100 K – 5500 K / CRI >70
Insulation Class I
Operating temperature -13°F to +113°F
Weight 3.3 – 5.5 – 8.8 lbs
* available only with external driver
MODELS POWER [W] LENGHTS
5R700 13 11.8”
10R700 23 23.6”
15R700 33 23.6”
20R700 40 39.3”
25R550 44 39.3”
25R700 * 55 39.3”
FLAT
The Flat are a family of general purpose LED flood lights.
The Flat are a cost-effective versatile solution that can be wall, ground or pole mounted.
Suitable for use in outdoor and indoor applications.
- Replaces up to 400W MH
TECHNICAL DATA
120-277 VAC
Aluminum body
4 mm protective tempered glass
IP66 / NEMA 4X
L70 >70,000 hrs
4100 K – 5500 K / CRI >70
Insulation Class I
Operating temperature -13°F to +113°F
Weight 3.3 – 5.5 – 8.8 lbs
* available only with external driver
MODELS POWER [W]
FL35 35
FL50 50
FL100 95
FL160 156
FL200 185
GONG / ZAK
The Gong and the Zak are low bay LED fixtures designed for industrial buildings, parking garages and canopies.
The wide light distribution ensures great performance in areas with low ceiling heights and the frosted polycarbonate lens controls the glare.
Replaces up to 400W MH/L-HPS/MV
Mounts on surfaces, conduit pipe or by suspension.
MODELS POWER [W]
15R700 34
30R550 53
40R525 70
TECHNICAL DATA
100-277 VAC
Die cast aluminum body
Polycarbonate lens
IP54 / NEMA 3S
L70 >100,000 hrs
4000 K – 5000 K / CRI >75
Insulation Class I
Operating temperature -13°F to +122°F
Weight 8.82 lbs (Gong) – 10.58 lbs (Zak)
PAD
The Pad is a low/high bay LED fixture designed to replace old L-HPS and MH fixtures and is widely used for warehouse lighting.
The superior glare control makes the light comfortable for all working conditions.
The Pad is available with a shatterproof plastic lens making it suitable for use in the food processing industry and gymnasiums.
Its clean design makes it well suited for auditoriums, museums and other similar applications.
1-10V and DALI dimming available.
TECHNICAL DATA
120-277 VAC / 347-480 VAC available
Die cast aluminum body
5 mm protective tempered glass
IP54 / NEMA 3S
L70 >100,000 hrs
4000 K – 5000 K / CRI >75
Insulation Class I
Operating temperature -13°F to +122°F
Weight 20.2 lbs
- Replaces up to 1000W MH
- Directional pendant mount
- Increases the safety of the workplace
- Photobiological risk exempt
- Optics available for circular or elongated patterns (for halls or rows)
MODELS POWER [W]
40R550 68
40R700 85
60R550 100
60R700 125
80R550 135
80R700 175
100R550 173
100R700 215
RADIANT 5
The Radiant 5 is a LED light designed for industrial and tunnel lighting.
Thanks to its enhanced moisture, dirt and corrosion resistance, it can be used in many harsh locations.
The ATEX certified version is available for dangerous flammable/ignitable locations.
The Radiant 5 is widely used in tunnels and underpasses where top level uniformity and glare reduction are required. The thin profile allow it to be used in low clearance ceilings.
At tunnel entrances the Radiant 5 can automatically adjust to the adjacent outside light, eliminating the black hole effect.
Powerline, 1-10V and DALI dimming available.
- Replaces up to 400W MH / L-HPS
- Casted using a patented corrosion free aluminum alloy
- Surface or suspension mounting
TECHNICAL DATA
120-277 VAC / 347-480 VAC available
SUPERCAST® aluminum die cast body
4 mm protective tempered glass
IP65 / NEMA 4
L70 >70,000 hrs
4100 K – 5500 K / CRI >70
Insulation Class I
Operating temperature -13°F to +122°F
Weight 26.4 lbs
MODELS POWER [W]
30R550 53
30R700 65
40R550 68
40R700 85
50R550 84
50R700 105
60R550 100
60R700 125
JANUS
The Janus is a LED light designed for low/high bay lighting and for high power linear lighting needs. It offers a very clean and elegant design, allowing it to be used in offices and various indoor rooms.
Thanks to the very wide and uniform beam, it works brilliantly in low ceiling heights.
1-10V and DALI dimming available.
TECHNICAL DATA
120-277 VAC / 347-480 VAC available
Anodized black aluminum body
Polycarbonate diffusor
IP54 / NEMA 3
L70 >50,000 hrs
4100 K / CRI ≥80
Insulation Class I
Operating temperature -13°F to +122°F
Weight 10.6 lbs
- Replaces up to 400W L-HPS and MH
- Improves the lighting where fluorescent tubes are not enough
- No glare
MODELS POWER [W]
Janus 55 55
Janus 100 100
Janus 150 150
KESU
The Kesu is a LED waterproof fixture designed to replace the similar looking fluorescent lights.
When compared to an equivalent size T8, the Kesu cuts the energy consumption in half.
No hazardous materials are used in its construction allowing it to be used in the food and agriculture industries and gymnasiums.
It comes standard with the highest surge protection level in its class.
1-10V dimming available.
TECHNICAL DATA
120-277 VAC
Polycarbonate body and diffuser
IP65 / NEMA 4
L70 >50,000 hrs
5500 K / CRI ≥80
Insulation Class I
Operating temperature -14°F to +104°F
Weight 2.5 lbs
- Replaces up to 2x58W fluorescent fixtures
MODELS POWER [W]
Kesu 120 62
JANUS
The Janus is a LED light designed for low/high bay lighting and for high power linear lighting needs. It offers a very clean and elegant design, allowing it to be used in offices and various indoor rooms.
Thanks to the very wide and uniform beam, it works brilliantly in low ceiling heights.
1-10V and DALI dimming available.
- Replaces up to 400W L-HPS and MH
- Improves the lighting where fluorescent tubes are not enough
- No glare
TECHNICAL DATA
120-277 VAC / 347-480 VAC available
Anodized black aluminum body
Polycarbonate diffusor
IP54 / NEMA 3
L70 >50,000 hrs
4100 K / CRI ≥80
Insulation Class I
Operating temperature -13°F to +122°F
Weight 10.6 lbs
MODELS POWER [W]
Janus 55 55
Janus 100 100
Janus 150 150
KESU
The Kesu is a LED waterproof fixture designed to replace the similar looking fluorescent lights.
When compared to an equivalent size T8, the Kesu cuts the energy consumption in half.
No hazardous materials are used in its construction allowing it to be used in the food and agriculture industries and gymnasiums.
It comes standard with the highest surge protection level in its class.
1-10V dimming available.
- Replaces up to 2x58W fluorescent fixtures
TECHNICAL DATA
120-277 VAC
Polycarbonate body and diffuser
IP65 / NEMA 4
L70 >50,000 hrs
5500 K / CRI ≥80
Insulation Class I
Operating temperature -14°F to +104°F
Weight 2.5 lbs
MODELS POWER [W]
Kesu 120 62
LED PANEL
The LED Panel is designed to replace fluorescent troffers.
They are usually recess mounted in a drop ceiling, but a surface mounting or suspension kit for hard ceilings is also available.
Users of the LED Panel experience massive energy savings compared to fluorescent troffers, and a safer and improved light.
No hazardous materials over your head, eliminating any health risk, even in case of breakage.
Suitable for use in schools and hospitals as well as offices, show rooms and hall ways.
The LED Panel light trumps fluorescent tubes with improved color quality and no light vibrations or flickering.
The workplace is much more comfortable and products displays are more attractive and vibrant.
1-10V dimming available.
- Replaces 2×4, 2×2 and 1×4 fluorescent troffers
TECHNICAL DATA
100-277 VAC
Aluminum body
Polycarbonate diffusor
IP40 / NEMA 3
L70 >50,000 hrs
3000 K – 4000 K – 5000 K / CRI ≥80
Insulation Class I
Operating temperature -13°F to +104°F
Weight 7.7 lbs (2’x2’ version)
MODELS POWER [W]
2’x2’ 36
1’x4’ 45
2’x4’ 70
KORA 2 / 3
The Kora 2 and Kora 3 are a series of LED downlights designed for the lighting of any room with a drop ceiling.
They are mainly used in new construction but there are also many applications in retrofit projects.
The quality of the delivered light is at the highest levels available on the market.
The power to the Kora is supplied from an external, low voltage output driver mounted in a NEMA 4 junction box.
- Replaces up to 150W incandescent
- Top level lighting and reliability
- External driver included
TECHNICAL DATA
120-277 VAC
IP40
L70 >60,000 hrs
3000 K / CRI ≥90 – 4100 K / CRI ≥85
Insulation Class II
Operating temperature -13°F to +104°F
Weight 0.26 lbs (Kora 2), 1.0 lbs (Kora 3)
MODELS POWER [W]
Kora 2
4A400 6.5
4A600 9.5
Kora 3
12A300 12
12A400 15
PL-LED
The PL-LED is a LED bulb designed to easily retrofit G24 fluorescent fixtures, cutting the energy consumption by 2/3rds.
To avoid electrical disturbances on the power line, the existing fluorescent ballast should be disconnected from the power (the PL-LED does not need it).
- Replaces 26W G24 fluorescent bulbs
- Slidable and rotatable base
- No cooling fans
TECHNICAL DATA
120-277 VAC
IP40
L70 >25,000 hrs
3000 K – 4100 K – 6000 K / CRI >80
Insulation Class II
Operating temperature -13°F to +104°F
Weight 0.4 lbs
MODELS POWER [W]
G24-M warm white 11
G24-N neutral white 11
G24-W cool white 11
QUINCY
The Quincy is a LED classic post top fixture designed for new construction or retrofit.
It is ideal for condominiums, apartment complexes, parking lots or as a decorative fixture for town or city centers.
Thanks to the different available optics, it’s often used as a streetlight, fully achieving the road safety standards.
The crosswalk dedicated optic makes the Quincy a unique road safety device.
1-10V, DALI and wireless control available.
TECHNICAL DATA
120-277 VAC
Dark gray die cast aluminum body
4 mm protective tempered glass
IP65 / NEMA 4
L70 >100,000 hrs
4000 K – 5000 K / CRI >75
Insulation Class I
EPA 2.15 ft2
Operating temperature -13°F to +113°F
Weight 17.6 lbs
- Replaces up to 250W L-HPS/MH post tops and 400W acorn fixtures
- Perfect mix of classic style and the most up-to-date technology
- Roadway lighting optics available
MODELS POWER [W]
10R550 18
10R700 23
20R550 35
20R700 44
30R550 53
30R700 65
CONVOY
The Convoy is a LED post top fixture designed for new construction or retrofit.
It is ideal for condominiums, apartment complexes, parking lots or as a decorative fixture for town or city centers.
Thanks to the different available optics, it can be used as a streetlight, fully achieving the road safety standards.
The crosswalk dedicated optic makes the Convoy a unique road safety device.
1-10V, DALI and wireless control available.
TECHNICAL DATA
120-277 VAC
Dark gray die cast aluminum body
5 mm protective tempered glass
IP65 / NEMA 4
L70 >100,000 hrs
4000 K – 5000 K / CRI >75
Insulation Class I
EPA 1.72 ft2
Operating temperature -13°F to +113°F
Weight 17.6 lbs
- Replaces up to 250W L-HPS/MH post tops and 400W acorn fixtures
- Donates a modern appearance to the location
- Roadway lighting optics available
MODELS POWER [W]
10R550 18
10R700 23
20R550 35
20R700 44
30R550 53
30R700 65
ELED
The ELED is a retrofit kit designed to update old acorn fixtures with the latest technologies where 360° light distribution is required.
To maximize the reliability of the product, the power is supplied to the bulb from an external, low voltage output driver that is typically fixed inside the pole.
TECHNICAL DATA
External driver
E40 base
Aluminum heatsink
Base made of insulating resin
IP64 / NEMA 3
L70 >50,000 hrs
3000 K – 4100 K / CRI >80
Insulation Class I
Operating temperature -13°F to +122°F
- Replaces up to 400W MH/L-HPS
- No cooling fans
WALLED
The Walled is a LED wallpack designed to be mounted outdoors on the walls of a building, lighting its surroundings.
It offers a full cutoff distribution, eliminating the light pollution to adjacent properties and the nighttime sky.
TECHNICAL DATA
120-277 VAC
Die cast aluminum body
Protective glass lens
IP65 / NEMA 4
L70 >50,000 hrs
4700 K / CRI ≥75
Insulation Class I
Operating temperature -22°F to +104°F
- Replaces up to 250W L-HPS/MH
- Full cutoff distribution
MODELS POWER [W]
Walled 40 40
Walled 80 80
TANK 14
The Tank 14 is a LED light designed to be installed in gas station canopies, drive-throughs, ATMs and loading canopies.
It is a very cost-effective solution that uses little energy to reach the required lighting levels, while giving a fresh new look to the business.
The external driver is fitted in a NEMA 4 junction box and the power is then supplied to the LEDs using a double insulation wire.
The external aluminum plate can be customized to match the existing canopy requirement.
TECHNICAL DATA
120-277 VAC
Aluminum body
Polycarbonate lens
IP65 / NEMA 4
L70 >70,000 hrs
4100 K – 5500 K / CRI >70
Insulation Class I
Operating temperature -13°F to +122°F
Weight 12.8 lbs (WOP-90)
- Replaces up to 400W MH
- Motion sensor, 1-10V and DALI dimming available
- Very cost effective solution
MODELS POWER [W]
WOP-45 45
WOP-90 90
WOP-135 135
WOP-185 185
GONG / ZAK
The Gong and the Zak are low bay LED fixtures designed for industrial buildings, parking garages and canopies.
The wide light distribution ensures great performance in areas with low ceiling heights and the frosted polycarbonate lens controls the glare.
- Replaces up to 400W MH/L-HPS/MV
- Mounts on surfaces, conduit pipe or by suspension.
TECHNICAL DATA
100-277 VAC
Die cast aluminum body
Polycarbonate lens
IP54 / NEMA 3S
L70 >100,000 hrs
4000 K – 5000 K / CRI >75
Insulation Class I
Operating temperature -13°F to +122°F
Weight 8.82 lbs (Gong) – 10.58 lbs (Zak)
MODELS POWER [W]
15R700 34
30R550 53
40R525 70
TRILOGY BUST
The Trilogy Bust is a LED photovoltaic system designed for locations where the power from the main line is not available.
Designed for sign lighting, gardens, walking paths and accent lighting.
It can also be used for canopy lighting or indoors, such as tool houses and barns, allowing massive savings in installation cost compared to a regular wired similar solution.
TECHNICAL DATA
12 VDC
Aluminum body
4 mm protective tempered glass
IP44 (module), IP66 / NEMA 4 (lamp)
L70 >70,000 hrs
5500 K / CRI >70
Charging regulator with intelligent battery control
Operating temperature -14°F to +122°F
Weight 3.3 lbs (lamp) – 18 lbs (module)
- Equivalent to 100W incandescent
- Turnkey product
MODEL POWER [W]
Trilogy Bust 13
TRILOGY N
The Trilogy N is a LED light bar designed for general flood lighting and sign/advertisement illumination.
The Trilogy is also perfectly suited for warehouse shelving, lighting shelves top to bottom while providing an adequate level of light on the floor.
Suited for all weather applications.
1-10V and DALI dimming available.
- Replaces up to 400W MH for signs and 250W MH for flood/warehouse lighting
- Increases the visibility of your business
TECHNICAL DATA
120-277 VAC
Aluminum body
4 mm protective tempered glass
IP66 / NEMA 4X
L70 >70,000 hrs
4100 K – 5500 K / CRI >70
Insulation Class I
Operating temperature -13°F to +113°F
Weight 3.3 – 5.5 – 8.8 lbs
* available only with external driver
MODELS POWER [W] LENGHTS
5R700 13 11.8”
10R700 23 23.6”
15R700 33 23.6”
20R700 40 39.3”
25R550 44 39.3”
25R700 * 55 39.3”
FLAT
The Flat are a family of general purpose LED flood lights.
The Flat are a cost-effective versatile solution that can be wall, ground or pole mounted.
Suitable for use in outdoor and indoor applications.
- Replaces up to 400W MH
TECHNICAL DATA
120-277 VAC
Aluminum body
4 mm protective tempered glass
IP66 / NEMA 4X
L70 >70,000 hrs
4100 K – 5500 K / CRI >70
Insulation Class I
Operating temperature -13°F to +113°F
Weight 3.3 – 5.5 – 8.8 lbs
* available only with external driver
MODELS POWER [W]
FL35 35
FL50 50
FL100 95
FL160 156
FL200 185
AMAR
The Amar is a LED bollard light designed to be used for outdoor accent and pathway lighting, adding a modern and elegant look to the property.
The power supply is mounted in an external NEMA 4X junction box that should be buried underground, the low voltage power is then supplied to the Amar using a double insulated wire.
TECHNICAL DATA
120-277 VAC
Aluminum alloy body
Satin finished polycarbonate diffuser
IP65 / NEMA 4
L70 >50,000 hrs
4100 K – 5500 K / CRI >75
Insulation Class II
Operating temperature -13°F to +113°F
Weight 7.7 lbs
- Replaces up to 35W MH
- Modern design
MODELS POWER [W]
Amar 85 SM00 13
Amar 85 SW00 13
TRILOGY BUST
The Trilogy Bust is a LED photovoltaic system designed for locations where the power from the main line is not available.
Designed for sign lighting, gardens, walking paths and accent lighting.
It can also be used for canopy lighting or indoors, such as tool houses and barns, allowing massive savings in installation cost compared to a regular wired similar solution.
TECHNICAL DATA
12 VDC
Aluminum body
4 mm protective tempered glass
IP44 (module), IP66 / NEMA 4 (lamp)
L70 >70,000 hrs
5500 K / CRI >70
Charging regulator with intelligent battery control
Operating temperature -14°F to +122°F
Weight 3.3 lbs (lamp) – 18 lbs (module)
- Equivalent to 100W incandescent
- Turnkey product
MODEL POWER [W]
Trilogy Bust 13
MINI SOLARBRICK
SOLARTOP 80
The Mini Solar Brick and the Solar Top 80 are two photovoltaic pathway markers, designed for use in private or business gardens, golf courses, country clubs and similar projects.
They are directly installed in the ground without any electrical connection.
These solar pathway markers are for walkways only (they cannot be used where there would be vehicular traffic).
- Turnkey product
- Easy installation, immediate looking impact
TECHNICAL DATA
Mini Solarbrick: glass body and lens
Solartop 80: ABS body, polycarbonate lens
IP68
L70 >100,000 hrs
Battery Ni-Mh 1.2V, 1000 mAh AA type
Working time after full charge:
48 hrs (Solartop 80), 96 hrs (Mini Solarbrick)
Operating temperature -4°F to +158°F
Weight 0.2 lbs (Solartop 80), 0.62 lbs (Mini Solarbrick)
MODELS POWER [W]
Mini Solarbrick 4 LEDs 0.35
Solartop 80 1 LED 0.30